The Honda Beat is a two-seat, mid-engine kei convertible that Honda built for Japan only, from 1991 to 1996. It never went on sale in the United States. Because every Beat is now well over 25 years old, it has become one of the easier Japanese-market cars for a first-time importer to bring home.
Yes, you can legally import and register a Honda Beat in the US, provided the car's build date clears the 25-year federal safety exemption, it stays in original configuration for the EPA, and your state will title it. The car itself is simple: a 656cc three-cylinder, a five-speed manual, rear-wheel drive and a cabin sized for Japanese kei rules. Most of the risk sits in rust, old electronics and paperwork.
Key Takeaways
- The Beat makes 64 PS from a high-revving 656cc engine and comes only with a manual gearbox.
- Federal import is straightforward for this age of car, but state titling rules decide whether you can drive it.
- Check sills, belt records, the ECU and chassis-number paperwork before you pay anything.
What Are the Beat's Specs and Driving Limits?
The Beat is a light, slow, high-revving car built to fit Japan's kei class: 656cc, about 3.3 meters long, 760 kg and 64 PS. Everything about how it drives comes from that rulebook, from the 8,100 rpm power peak to the tight cabin.
Engine and Horsepower: How MTREC Makes 64 PS
Every Beat uses the PP1 chassis and the E07A engine: a 656cc three-cylinder, water-cooled, with a belt-driven SOHC head and four valves per cylinder. Most rival kei sports cars used turbochargers. Honda went naturally aspirated instead.
The trick is MTREC (Multi Throttle Responsive Engine Control). It gives each cylinder its own throttle valve and switches electronically between two fuel maps. That lets the small engine breathe hard at high rpm.
| Spec | Figure |
|---|---|
| Displacement | 656cc |
| Layout | Inline three, SOHC, 12 valves |
| Power | 64 PS (about 63 hp) at 8,100 rpm |
| Torque | 6.1 kgf·m (about 44 lb-ft) at 7,000 rpm |
| Compression | 10.0:1 |
| Fuel | Unleaded regular |
The 64 PS figure is the cap Japan set for kei cars at the time. You won't feel much below 5,000 rpm, so plan on revving it.
Mid-Engine Layout
The engine sits behind the seats and ahead of the rear axle, mounted sideways. Honda quotes a 43:57 front-to-rear weight split with one person aboard.
Space is tight back there. The 24-liter fuel tank lives on the right side of the engine bay, so the engine is offset to the left. The spare tire fills the front, and a small trunk sits behind the engine.
For you as an owner, this means engine access is cramped. Simple jobs like changing spark plugs or the timing belt take longer than on a front-engine car.
Rear-Wheel Drive and Manual-Only Shifting
Honda sold the Beat with a five-speed manual and rear-wheel drive only. No automatic was offered from the factory. If you see an automatic Beat, someone swapped it.
The shifter has a 40 mm throw, the same as the NSX. Gear ratios run 3.428, 2.166, 1.576, 1.172 and 0.941, with a 5.714 final drive. That short gearing keeps the engine in its power band but makes highway cruising busy.
The upscale PP1-110 version added ABS and a limited-slip differential. The base PP1-100 skipped both. All four wheels get disc brakes, which Honda called a first for a kei car.
How Fast Is It, and How Small Is the Cabin?
Expect 0-62 mph in roughly 13 seconds. Top speed is electronically limited, with published figures landing in the low-to-mid 80s mph. That is enough for US highways, but you'll be working the engine hard and sitting low among large trucks.
The body measures 3,295 mm long, 1,395 mm wide and 1,175 mm tall (about 10.8 by 4.6 by 3.9 feet) on a 2,280 mm wheelbase. Headroom is the usual complaint for tall drivers. Sit in the car with the top up before you buy, and check that your feet fit the pedal box with your normal shoes.
Can You Import and Register One in the US?
You can, because every Beat was built between 1991 and early 1996 and all of them now clear the federal age thresholds. Federal approval is only half the job, though. Customs paperwork must be correct, and your state decides whether you get plates.
The 25-Year NHTSA Rule and Checking the Build Date
NHTSA exempts a vehicle from the Federal Motor Vehicle Safety Standards once it is at least 25 years old, measured from its date of manufacture. The rule runs on the month and year built, not the model year or the date it was first registered in Japan.
Every Beat left the factory by early 1996, so as of late 2026 every PP1 is past that line. Still, check the build date on the vehicle plate and match it to the export certificate. A mismatch between the plate and the papers is a red flag worth stopping a sale over.
The Separate EPA Age and Original-Configuration Requirements
The EPA runs its own rule. It exempts vehicles at least 21 years old, but only when they remain in original configuration and haven't been modified from the manufacturer's design.
That matters for the engine above all. A Beat with its original E07A should qualify on age. A Beat with a swapped engine, missing emissions parts or a non-original setup can fail this test even though it clears NHTSA's 25-year rule. Ask the seller in writing what has been changed.
CBP Entry, EPA Form 3520-1 and DOT Form HS-7
The car enters through US Customs and Border Protection at the port. You or your customs filer submit EPA Form 3520-1 (declaring the emissions exemption) and DOT Form HS-7 (declaring the safety exemption), plus the bill of lading, the Japanese export certificate and proof of ownership.
Get the formal entry right. CBP states that it is illegal to sell an imported vehicle that has not been formally entered. Keep a copy of the CBP entry summary (Form 7501) safe, since your state DMV will ask for it.
The paperwork load is real. One writer who imported a Beat without help stopped counting at 23 Customs forms. Many first-timers hire a licensed customs broker for this step.
Why State Registration and Emissions Rules Still Matter
Federal clearance doesn't guarantee a title. Each state sets its own rules for titling, inspection and emissions, and some states restrict or refuse kei-class vehicles on public roads or limit them to lower-speed roads.
Before you buy, call your DMV and ask three things: whether they title imported kei cars, which documents they want, and whether your county requires an emissions or safety inspection. If you live in a strict emissions state, ask specifically how they treat a 1991 to 1996 import. Get the answer in writing if you can.
What Should US Buyers Check Before Paying?
Condition beats rarity on this car. Check the body for hidden rust, confirm recent belt and electrical work, make sure you fit, and verify that every document matches the chassis number.
How to Evaluate Asking Prices, Sold Prices and Total Costs
Asking prices in online listings can run above what cars sell for, so compare completed sales where you can find them. JDMBUYSELL's Beat PP1 guide tracks asking prices across its listings and labels them as asking prices, not sales. Condition, mileage, rust repair, documented maintenance and special-edition paint all push the number up or down.
The car price is only the start. Your total cost includes:
- Inspection in Japan before purchase
- Inland transport to the port and ocean shipping
- Customs broker fees, duty and port charges
- Transport from the US port to your home
- State title, registration, tax and any inspection
- Immediate catch-up maintenance such as the timing belt, fluids and tires
Budget for that last item on almost every car, since service records from Japan are often thin.
Rust, Sill Drains, Soft-Top Leaks and Body Repairs
Rust is the biggest worry. The sills use a double-wall structure, and when dirt blocks their drains, water sits inside and rots them from the inside out. Fresh outer paint tells you nothing here. JDMBUYSELL's Beat guide passes on the same specialist warning about blocked sill drains.
Ask for photos of the sill drains, the underside, the floors and the rear subframe area. Look for bubbled paint at the sill ends and behind the wheels.
Check the soft top for tears, shrunken rear windows and water stains on the carpet. A leaking top lets water reach the floors, which feeds the rust problem. Uneven panel gaps or mismatched paint point to earlier crash repairs.
Timing-Belt Records, Distributor Health and ECU Problems
Ask for the date and mileage of the last timing-belt change. Some belts have been reported failing well before typical service intervals, and a broken belt on this engine can mean serious damage. If there's no record, plan a belt service as soon as the car arrives.
Two heat-related weak spots deserve questions. The distributor suffers under engine-bay heat, so ask when it was last replaced. The ECU is mounted near the engine, and heat can cause its capacitors to leak. A car with a repaired or recapped ECU is a plus; an original board deserves an inspection by an electronics specialist.
Look for blue smoke and ask about oil use. Heavy oil burning on a hard-used engine points to worn piston rings.
Cooling, A/C, Cabin Fit and Parts Availability
On the Beat, the A/C compressor circuit shares a fuse with the radiator fan. A failed compressor coil can blow that fuse and stop the fan, which risks overheating. Ask the seller to confirm the radiator fan runs and the A/C mode lamp lights.
US summers are harder on this cooling system than many Japanese commutes, so a healthy radiator and fan come first.
Parts support is better than you might expect for a car of this age. Honda launched a Beat parts program in August 2017 after finding that 19,759 of the cars sold were still on the road in 2015. Supply of some reproduction parts depends on suppliers and isn't promised forever, so buy key wear parts when you see them.
Matching Chassis Numbers, Import Documents and Modifications
The chassis number on the car must match the Japanese export certificate, the bill of lading and every US form. Find the number on the frame and compare it digit by digit with the papers before money changes hands.
Ask for a full list of modifications. Aftermarket wheels and exhausts are common and easy to judge. Engine changes, removed emissions parts or an automatic swap can create EPA problems and lower the value. If you're buying a car already in the US, ask for the CBP entry documents and the HS-7 and 3520-1 copies.
Where Does the Beat Fit in Honda's History?
The Beat was Honda's take on a pure, small sports car during the brief early-1990s boom in kei roadsters. It sits between the S500 to S800 sports cars of the 1960s and the S660 that arrived decades later.
The 1991 Launch, Pininfarina Design and Soichiro Honda Connection
Honda announced the 1991 Honda Beat on 15 May 1991 and began sales in Japan the next day through its Primo dealer network. The launch followed a 1990 change to kei rules that raised the displacement limit to 660cc.
Pininfarina handled the styling, with freelance designer Pavel Husek doing the work. The Beat is also known as the last car approved by Soichiro Honda before he died in 1991. Production ended in February 1996 at about 33,600 cars, roughly two-thirds of them built in the first year. All were right-hand drive.
Versions F, C and Z: Colors and Equipment
Standard Beats came in yellow, red, silver or white. Honda then added limited editions to keep sales moving:
| Version | Date | Paint | Notable equipment |
|---|---|---|---|
| Version F | February 1992 | Aztec Green Pearl | Alloy wheels |
| Version C | May 1992 | Captiva Blue Pearl | White alloy wheels |
| Version Z | 1993 | Blade Silver Metallic or Evergrade Green Metallic | Alloys, rear spoiler, mud flaps, black-faced gauges |
The Version Z was based on the PP1-110, so it carries ABS and the limited-slip differential. If a seller claims a special edition, check that the paint code and equipment match.
How It Compares with the Cappuccino, AZ-1 and S660
The Beat was the first of Japan's three early-1990s kei sports cars, and the only one without a turbo.
| Honda Beat | Suzuki Cappuccino | Autozam AZ-1 | Honda S660 | |
|---|---|---|---|---|
| Launch | May 1991 | November 1991 | January 1992 | 2015 |
| Engine position | Mid | Front | Mid | Mid |
| Induction | Naturally aspirated | Turbo | Turbo | Turbo |
| Body | Soft top | Removable roof panels | Gullwing coupe | Removable top |
| US import status | Eligible by age | Eligible by age | Eligible by age | Too new |
The Honda S660 is the Beat's spiritual successor, with the same kei footprint and a mid-mounted engine. The S660 won't reach the 25-year mark for many years, which keeps the Beat as the realistic Honda kei roadster for US buyers.
Buy for Condition, Fit and Clear Paperwork
A Honda Beat is a fun, light and attainable import once you treat the purchase as three separate checks. Start with the body, because sill rust from blocked drains is the costliest problem to fix.
Next, confirm the mechanical basics:
- A recent timing-belt record, or a plan to replace it on arrival
- Distributor and ECU history
- A working radiator fan and A/C lamp
- An original engine for EPA purposes
Then make sure you fit. Sit in the car, top up, with your usual shoes.
Last, line up the paperwork before you commit. Match the chassis number to the export certificate, keep your CBP entry, HS-7 and 3520-1 copies together, and get your state DMV's titling requirements in writing before the car ships.
Frequently Asked Questions
Can you get a Honda Beat in the US?
Yes. Honda never sold it here, but every Beat is now past the 25-year federal safety exemption, so you can import one if it stays in original configuration for the EPA. Your state still has to agree to title and register it.
How much does a Honda Beat cost in the US?
Prices move with condition, mileage, rust history, service records and special-edition paint. Compare completed sales over asking prices, then add shipping, customs, broker fees, state title costs and catch-up maintenance to get your true total.
How fast is a Honda Beat?
It reaches 62 mph in roughly 13 seconds, and top speed is electronically limited to the low-to-mid 80s mph. It keeps up with highway traffic but feels busy doing it.
How much horsepower does a Honda Beat have?
The Beat makes 64 PS, about 63 hp, at 8,100 rpm from its 656cc three-cylinder. That was the legal maximum for a kei car in Japan at the time.
Is the Honda Beat rare?
In the US, yes, because every example here is an individual import. Honda built about 33,600 in total, and the special editions like Version F and Version C were produced in limited runs.
Can you daily drive a Honda Beat in the US?
You can in states that register it for full road use, but it's a small, light kei car with no airbags as standard and modest speed. Many owners use it for back roads and short trips and keep a larger car for long highway commutes.