RX-7 prices in the US depend first on generation. Third-generation FD cars sit at the top of the market, and first-generation and FC cars sit lower.
That band covers the cars most buyers see, and the price of the car is only the first number you need to plan for. For a running, honest example, expect to pay about $12,000 to $25,000 for an FC and $40,000 or more for a clean US-market FD, then set aside extra money for a rotary engine check and possible rebuild.
For an imported FD, one dated reference point: JDMBUYSELL's FD3S guide put the typical asking price at about US$38,670 on 9 November 2026, the median of 251 priced listings, most of them in Japan. Those are asking prices before shipping and duty, not confirmed sales.
Mazda built the RX-7 from 1978 to 2002 across three generations, and each one has its own price ladder. Importing a Japanese-market car opens up later FD models the US never got. It also adds freight, duty, paperwork and state rules to your total.
Key Takeaways
- FD cars cost two to four times as much as FC or first-generation cars in similar shape.
- Engine health and documented history move an RX-7's price more than paint or wheels.
- An imported JDM car needs a landed-cost budget of several thousand dollars above the purchase price.
How Do SA/FB, FC, and FD Values Compare?
FD cars command the highest prices, FC values come next, and first-generation cars span the widest gap between rough projects and rare, preserved examples.
The ranges below are approximate, dated figures. Condition and history can move any single car well outside them.
| Generation | US model years | Approximate value range (2026) |
|---|---|---|
| SA/FB (first gen) | 1979–1985 | Wide; best cars over $40,000 |
| FC (second gen) | 1986–1991 | About $12,000–$48,500 at auction |
| FD (third gen, US) | 1993–1995 | Base benchmark about $40,758 |
| FD (JDM only) | 1996–2002 | Spirit R benchmark about $58,755 |
SA/FB: First-Generation Prices by Year and Trim
The first-generation car has two codes. Cars built from 1978 to 1980 (including the 1979 Mazda RX-7 and 1980 Mazda RX-7) are SA. The 1981 facelift brought restyled bumpers and a standard five-speed, and Mazda re-coded it "FB," which covers the 1982 and 1983 Mazda RX-7.
Trim drives first-gen value more than year. Here is how the main trims compare:
- S and GS: The S base cars used disc-front, drum-rear brakes. The Mazda RX-7 GS sits in the middle of the range.
- GSL: These cars added rear discs and a limited-slip differential.
- GSL-SE (1984–1985): This is the one collectors chase. It came with the fuel-injected 1.3-liter 13B making 135 hp, up from the 100 hp of the 12A.
Most first-gen cars trade as affordable drivers. A standout example can go much higher: the priciest first-gen RX-7 in 2024 sold for $42,250.
If you see a very low price on a first-gen car, check for rust and a tired 12A before anything else.
FC: Coupe, Turbo II, and Convertible Prices
FC auction results through late 2026 run from about $12,000 to $48,500. The 1986 Mazda RX-7 base coupe made 146 hp. The Turbo II arrived for 1987 with 182 hp, and it carries a clear premium.
Here are some approximate, dated reference points:
- 1987 coupe in #3 "Good" condition: about $12,667 (July 2026). The low figure for that year was about $7,767.
The RX-7 convertible arrived in 1988. A 1991 Mazda RX-7 convertible in #3 condition was valued around $11,567 in October 2026. Low-mileage Turbo II cars and clean convertibles can bring well above these figures, so check recent completed sales for your exact trim before you make an offer.
A 1989 Mazda RX-7 GTU (the lighter, non-turbo performance model) or a later 1991 coupe with low miles can bring more than a base car.
FD: Comparing the 1993–1995 U.S. Models
The US got the FD only for model years 1993, 1994 and 1995. Mazda sold roughly 13,879 of them here, and only about 500 of those were 1995 cars. The 1993 Mazda RX-7 is the most common, and the 1994 Mazda RX-7 is the middle year.
The 1995 Mazda RX-7 is the rarest by volume. Approximate October 2026 market benchmarks by US trim:
| US FD trim | Benchmark (Oct 2026) |
|---|---|
| Base | $40,758 |
| Touring | $43,697 |
| R1/R2 | $56,050 |
The Mazda RX-7 R1 (1993) and R2 (1994–1995) added Bilstein shocks, stiffer springs, extra oil cooling and aero parts. Just over 2,600 were sold in the US. Exceptional low-mileage examples sell far above the benchmark in the table.
Mazda offered the R1 wing on Touring cars, so verify the lip spoiler, the suede seats and the VIN before you pay R-model money.
JDM FD Models: Later Cars and Spirit R Values
Japan kept building the FD until 2002, so the later JDM cars give you trims the US never had:
- Type RZ: lightweight, two-seat versions, benchmarked around $54,124 in October 2026.
- Spirit R: the final 2002 run, benchmarked around $58,755 at the same time.
These cars are right-hand drive and arrive through import. Spirit R cars went on sale in April 2002, according to JDMBUYSELL's FD3S guide, so none reaches 25 years before 2027. That affects when you can bring one in (more on that below).
What Makes One RX-7 Worth More Than Another?
Engine health and history set an RX-7's price first. Originality and trim come next. Two cars of the same year can differ by $20,000 or more because of a compression result, a service file, or a set of aftermarket parts.
Condition, Rust, Mileage, and Service Records
A clean body with original paint and no rust brings a premium on every generation. First-gen and FC cars rust in the rear wheel arches, the floor pans and around the hatch.
Mileage counts, but the record behind it counts more. A rotary with 90,000 miles and receipts for regular oil, coolant and ignition service is worth more than a 50,000-mile car with no paperwork. Ask for receipts and compression test results, plus any notes on the engine's history.
Originality, Modifications, and Documented Rebuilds
Stock FDs are hard to find. Many were modified for power, and some now carry V-8 swaps in place of the 13B. Unmodified cars bring the highest money.
A documented rebuild from a known rotary shop can add value, because it resets the engine clock. An undocumented rebuild adds little. Bolt-on parts like big turbos, standalone engine computers and removed emissions gear lower value for most buyers. They also cause problems if you plan to import the car.
Trim, Transmission, and Left- vs. Right-Hand Drive
Rare trims cost more: the GSL-SE, the Turbo II, the R1/R2, the Type RZ and the Spirit R. Color plays a part too. Only 350 Competition Yellow R1 cars were built, all for 1993.
Most buyers want a manual. A few US FD automatics are rare, but rarity alone does not lift every car's price. Right-hand-drive JDM cars are legal to own here. US left-hand-drive FDs still sell for more because fewer exist.
Asking Prices vs. Completed Sales
Asking prices run high, so compare a listing with completed sales of similar cars. Base your offer on sold cars of the same generation, trim and mileage. Market databases list about 75 RX-7s for sale at a time, so you have room to wait for the right car.
What Should You Budget Beyond the Purchase Price?
Plan for an inspection before you buy, then keep a repair fund after. A rotary engine wears its apex seals over time, and low compression means a rebuild. That single repair can cost more than the gap between a cheap car and a good one.
Rotary Compression Testing Before You Buy
Ask for a compression test before you agree on a price. A rotary needs a rotary-specific tester. That tool reads each of the three faces on each rotor, and a standard piston-engine gauge can't do this.
Have the test done warm, and look for even numbers across all faces. One weak face points to a worn or broken apex seal. A seller who refuses a test is a reason to walk away.
Cooling, Turbo Systems, and Other Inspection Priorities
Overheating kills rotaries, so check the radiator, the hoses and the coolant for oil or bubbles. On the FD, the sequential twin-turbo system has a maze of vacuum hoses. Test-drive the car so you can feel the second turbo come in smoothly around mid-range.
Also check:
- Smoke at startup, which points to oil seal wear
- Hard hot starts
- A rusty or patched body
- Wiring tampered with during past modifications
Maintenance, Repairs, and a Rebuild Reserve
Rotaries burn a little oil by design, so you need to check the level often. Plan on more frequent oil changes and regular spark plug changes than a piston engine needs.
Keep money aside for an engine rebuild, sized to your car's compression results and history. Shop rates vary, so get a written rebuild quote from a rotary specialist before you buy. Add it to your price ceiling.
What Does Importing a JDM RX-7 to the U.S. Add?
Importing adds federal paperwork, shipping, duty and state titling on top of the car's Japanese price. For a typical mid-value import, plan on roughly $4,000 to $9,000 above the purchase price (2026 estimates). Containers, high-value cars and California compliance push that number higher.
Check the Build Date for NHTSA Eligibility
A vehicle 25 or more years old, by its date of manufacture, is exempt from the Federal Motor Vehicle Safety Standards. NHTSA counts that age by build date. Model year does not count.
All SA and FC cars clear this now. FD cars qualify month by month. A car built in November 2001 reaches 25 years in November 2026, and 2002 Spirit R cars qualify through 2027.
Check the build date on the vehicle plate (door jamb or engine bay) before you pay anything.
EPA Original-Configuration Requirements and Entry Forms
The EPA exempts vehicles at least 21 years old only when they are in original configuration. That means the car has not been modified from the manufacturer's original design. A swapped engine or heavy engine changes can disqualify the car.
The car enters through US Customs and Border Protection. You need these forms:
- CBP Form 7501: declares the car's value and the duty owed
- DOT Form HS-7: claims the safety exemption
- EPA Form 3520-1: claims the emissions exemption
Keep copies of all three for your DMV.
Shipping, Customs Duties, Port Fees, and Inland Transport
Here are typical 2026 cost ranges:
| Item | Approximate range |
|---|---|
| Japan-side fees | $1,000–$2,500 |
| Ocean freight (roll-on/roll-off) | $1,500–$3,500 |
| Marine insurance | 1.5%–2.5% of value |
| US duty (passenger car) | 2.5% base rate on the customs value, plus any additional tariffs on Japan-origin goods |
| Brokerage and processing | $300–$800 |
| Port handling and inland transport | $500–$2,000 |
Federal processing fees and a Harbor Maintenance Fee also apply. Shipping in a container costs more than roll-on/roll-off, and it protects a valuable car better.
State Registration, Emissions Rules, and the Landed-Cost Budget
State compliance and registration run about $200 to $1,500 or more. You'll need the export certificate with a certified translation, the bill of sale and copies of your federal entry forms. Some states also want a VIN inspection.
California is the hardest state. It does not honor the federal 25-year exemption for its own emissions rules, so you need to check CARB requirements first. Expect two to four months from purchase to plates.
Choose an RX-7 Your Full Budget Can Support
Pick the RX-7 you can afford after inspection, repairs and any import costs, not just the one whose price fits. Start with your total, then work backward.
- Under about $20,000: a running first-gen or FC coupe, or a convertible, is realistic.
- About $25,000 to $40,000: look at a strong FC Turbo II or a fair US FD.
- Over $40,000: clean US FDs, R1/R2 cars and later JDM trims open up.
Hold back a rebuild reserve on every Mazda RX-7, and get a rotary compression test before you sign. If you're importing, add roughly $4,000 to $9,000 to the car's price and confirm the build date on the plate first.
Frequently Asked Questions
Can I find a running Mazda RX-7 for under $10,000?
Yes, mainly among first-gen cars, FC coupes and convertibles. The 1987 FC's low valuation figure was about $7,767 in July 2026, and a 1991 convertible's low figure was about $6,533 in October 2026. Budget for repairs, because cheap cars carry deferred maintenance.
Is an RX-7 under $5,000 likely to be a project?
Yes. At that price, expect low compression, rust or missing parts. Price in an engine rebuild before you buy.
Why does an FD RX-7 usually cost more than an FC?
The FD made 255 hp from a twin-turbo 13B, and fewer were sold in the US: about 13,879 over three years. Its styling and racing reputation keep demand high. Unmodified FDs are scarce, which pushes clean examples higher still.
Can I legally import a 2000 or 2002 Mazda RX-7 into the U.S.?
A 2000 car qualifies now, because anything built by late 2001 has passed 25 years. A 2002 car becomes eligible as it turns 25 by build month during 2027. Check the build date on the vehicle plate, and keep the car in original configuration for the EPA exemption.
Is buying an RX-7 already registered in the U.S. cheaper than importing one?
Often, yes, because you skip freight, duty, brokerage and state compliance costs of several thousand dollars. You can also inspect the car in person first. Importing makes more sense when you want a JDM-only trim like the Type RZ or Spirit R.